Solenoid Valve Connectors Type A PG9 PG11 Valve Plug Wirable 4 Pin IP65 Connector Types
The solenoid valve controls the flow of the fluid from inlet port to the outlet port,and the outlet port is eventually connected to the process where the fluid is required. The body of the solenoid coil is cylindrical in shape, and it is hollow from inside. Solenoid valves are used wherever fluid flow has to be controlled automatically, they are being used to an increasing degree in the most varied types of plants and equipment.
* Indicator light shows power relay
* Screw-mount socket type A, gland size PG11
* Voltage rating of 24 V dc
* Current rating of 10 A
* Contact resistance of 20 mΩ
General Details
Contacts: 3+PE/2+PE
Connector design: Valve plug
Connector locking system: central bolt
Termination: screw clamp
Wire gauge (mm): min. 0,34 mm², max. 1,5 mm²
Wire gauge (AWG): min. AWG 22, max. AWG 16
Cable outlet: 6,0 - 8,0 mm
Upper limit temperature: 120 °C
Lower limit temperature: -30 °C
Electrical values
Rated current (40 °C): 10 A
Rated voltage: 250 V
Rated impulse voltage: 4000 V
Pollution degree: 3
Overvoltage category: III
Insulating material group: III
Volume resistivity: ≤ 15 mΩ
Insulation resistance: ≥ 10¹⁰Ω
EMC compliance: not shielded
Degree of protection: IP65
Mechanical operation: > 50 Mating cycles
Material
Contact material: CuSn (bronze)
Contact plating: Ni (nickel)
Contact body material: PA (UL 94 HB)
Housing material: PA
| Mounting Type | Central screw |
| Pins | 4p, 3P, 2P |
| Connector insert | TPU |
| Application | Power |
| Shielding | Unavailable |
Component part drawing
Solenoid Valve Connector Series
Product Tags:
|
|
Type A Solenoid Valve Connector PG9 PG11 Valve Plug Wirable 4 Pin IP65 Connector Images
|
